 |  | | 2-component profile made of PP and TPE-V
|  |
|
|
| | |
|
KraussMaffei Berstorff underpins its
competence in profile production lines
|  | |
Hanover, May 12, 2009
| |
Hannover-based KraussMaffei Berstorff GmbH has developed an innovative
line concept for the production of 2-component profiles made of PP and TPE-V.
Two or three single-screw extruders of different size form the core elements of
the co-extrusion line designed for optimum material melting and homogenizing.
Detailed information on the new line concept will be available on the
KraussMaffei Berstorff stand at the International Rubber Conference 2009 in Nuremberg (June 29 to
July 2, 2009, stand 12-329).
The first line of this type used for the production of high-quality
window profiles for the new VW Golf VI has already been successfully
commissioned at the customer's premises. The profiles are composed of a
polypropylene profile clamping element, TPE-V sealing lips and a flock tape
laminated onto the lips after the discharge from the extrusion die. The decisive
benefits offered by two-component profiles are easy recycling, low part weight
and reduced production cost.
The scope of delivery of the system supplier KraussMaffei Berstorff
comprises two or three extruders of different size with extrusion dies as well
as extensive downstream equipment including calibration cooling section,
caterpillar take-off and cutting machine with stacking unit for the cut
profiles.
Flexible
production
The co-extrusion line features a typical
V-type extruder arrangement. The primary extruder – in most cases designed as a
TE 90 with a processing section length of 30 D – is used for processing
the PP material. The additional single-screw extruders TE 75 and 45, with
processing section lengths of 28 to 30 D each, deliver the extruded TPE-V at an
angle of 45 degrees to the PP material. While the primary extruder is firmly
screwed to the line, the two other extruders can be freely displaced. Thanks to
this arrangement, the line can be flexibly adjusted to individual production processes.
Depending on the material processed, the line achieves a production speed of up
to 15 to 20 m/min.
|
|
|
|
|
back
page top